Loaded Zee Bracket truck mounting system
Loaded Zee Bracket truck mounting system
Loaded Zee Bracket truck mounting system
Loaded Zee Bracket truck mounting system
Loaded Zee Bracket truck mounting system rendering
Loaded Zee Bracket truck mounting system rendering
Haga clic para abrir la vista ampliada

Soporte en Z

FABRICA TU PROPIA ALFOMBRA MÁGICA.

Precio
$58

Garantía de por vida

Devoluciones sin complicaciones

Hecho Responsablemente

En stock y listo para enviar
Descripción

Crea tu propio longboard de skate de perfil bajo para aventuras urbanas de otro nivel.

Diseñados exclusivamente para Loaded por nuestros amigos, los magos de G/Bomb Skateboards, los soportes Zee son una innovación revolucionaria que nos permite crear una nueva generación de vehículos de alto rendimiento de perfil bajo y te permite crear tu obra maestra de perfil bajo.

¡Comparte tus creaciones DIY de soportes Zee con el hashtag #LoadedZeeBracket!

Especificaciones
Largo 8.25″ / 21.0 cm
Ancho 3.25″ / 8.26 cm
Altura 2.25″ / 5.72 cm
Peso (par) 0.875 lb / 0.4 kg
Longitud añadida a la distancia entre ejes de la tabla 9.25″ / 23.5 cm
Recomendaciones de uso Diseñado para ciclistas de hasta 250 lb / 113 kg bajo uso normal. Los ciclistas de 250-300 lb / 113-136 kg deben minimizar el bombeo agresivo.
¿Qué incluye?

Dos (2) soportes Zee, ocho (8) juntas tóricas.

Características
  • Reduce la altura de manejo en aproximadamente 1.5″ / 3.8 cm en comparación con una patineta con montaje superior
  • Ruedas grandes: admite ruedas de entre 75 y 105 mm sin wheelbite
  • Súper rígido: hecho de resina de grado automotriz reforzada con fibra
  • Amortiguación de vibraciones: Ocho amortiguadores de vibración de junta tórica de uretano (cuatro por soporte)
  • Ejes: Funciona con una variedad de ejes de entre 150 y 180 mm. Se recomiendan ejes de pivote invertido (como Paris, Bear, Caliber). Funciona con tablas de calle estándar utilizando los orificios de montaje de ejes existentes. IMPORTANTE: Instale los ejes en el soporte Zee en posición drop-through.
Equipo recomendado
  • Ruedas Grandes (75-105mm)
  • Ejes de Kingpin Invertido (150-180mm)
  • Rodamientos
  • Tornillería de Skate (dos juegos)
  • Lija
  • Tabla: Crea tu propia tabla a partir de una tabla de skate antigua, una tabla de longboard, una tabla de snowboard vieja, un tablón de madera, la inestimable mesa de café de tu madre, etc.
Loaded Zee Bracket truck mounting system

Soporte en Z

$58

Doble-caída casero

Si vas a montar el Zee Bracket en tu propia tabla, es posible que tengas que hacer algunos cortes. Por suerte, incluimos una práctica plantilla en la tapa de la caja para ayudarte a conseguir el ajuste perfecto. También puedes descargar el PDF aquí (imprime al 100 % de la escala).

El corazón de la Loaded Fathom & Tangent

El Zee Bracket está aquí para hacer realidad todas tus visiones personalizadas de longboard de doble drop. Para una experiencia Loaded curada, echa un vistazo a nuestra familia de tablas con bracket.

Imprime tu propio muñón de cola

We designed an optional free 3D-printable nub that can be attached to the rear truck, allowing you to pop your board up. It can also allow you to balance your board vertically on end (depending on wheel choice).

The STL file is in millimeters. Print at 100% size. The centers of the holes should be 1.625″ or 41.275mm apart. We recommend a 100% infill for maximum strength.

Download STL file here.

Overall rating: 4.875 / 5 from 24 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Really fun time!

"Really fun and easy to create your own low rider! I bought specifically for airline travel so a board would fit into a suitcase without zee brackets attached."

— Mike P. (5/5)

Love the bracket System!

"I've had the brackets on my Tangent since last summer and couldn't be happier. I recently had to replace one after my board got run over by a car, but with the replacement mounted it keeps rolling!"

— Jan E. (5/5)

Frankenstein boosted

"I love this set up. Was super fun to bring the boosted board back to life."

— Corey W. (5/5)

"This part is very easy to install, and it’s the key to the best drop through boards."

— Karl (5/5)

"This part breaks very easy if you ghost your board into a curb. . oops. It’s nice that it’s only about $25 per bracket. It was fairly easy to install and tested good. Everything arrived in awesome packaging to store my extra bracket, and thank you for the stickers!!"

— Karl (5/5)

Love them

"Big fan of these - Have made a couple of different platforms and have really enjoyed experimenting with the brackets"

— kesroberts (5/5)

just a token of appreciation

"Guys, I've been riding your boards since 2013, never ever had any issues. Love the attention to details, love the riding experience, love the materials, love the artworks, love the way you're building the brand. This was the only time I had a problem. The bracket broke because it was not installed correctly - clearly that's on me. The fact you replaced it at no cost, shipped it to freaking Estonia and put some stickers in the box just shows the attitude. I think I'll stay loyal to the brand for another 30-40 years depending on how many times I fall on my head. Big love!"

— Arseny S. (5/5)

Cool

"I like how they work. I've used them on a different board as well and made it super fun. My only complaint is that it doesn't come with shock pads, which for me were necessary because it would make a creaky plasticky noise before I put some on where it contacts the board and for 300 bucks. I don't want to hear classic squeaking."

— Kory L. (4/5)

Great starting point for my

"Great starting point for my ldp journey!"

— Fred C. (5/5)

"Some crazy technology"

— Brian (5/5)

Q&A

Looked but didn’t find… Is there a max weight recommendation??
Designed for 250 lb, (113 kg) during normal use which includes some pumping. Riders 250-300 lb (136 kg) should minimize pumping to avoid stress.
You mention that RKP trucks are recommended. Would TKP still work with these brackets? I'm running ~149mm trucks with 86mm wheels
TKP will fit with the Zee Bracket, but we don't recommend them. Typically riders will have a split RKP front and TKP back (or a lower angle RKP), to improve pumping. However these brackets are designed for pushing rather than pumping and a more robust bracket is available from GBomb for that purpose. Feel free to contact us at dontwalk@loadedboards.com if any other questions!
Is any deck modification need to use this with a 8" street deck? Any suggestions on truck and wheel setup? Thanks
Check out the Zee bracket product page for a template to modify your current deck. If you're turning this into a double-drop cruiser, we would suggest 150-180mm RKP trucks, and wheels 75mm or larger to allow good ground clearance. Contact us at dontwalkwalk@loadedboards.com for help with a specific set-up.
Hey like the brackets would they work for LDP and what is the wait limit ?
Yes absolutely the Zee brackets are designed as a low cost entry into long distance pushing. With the double drop design providing a low deck height and the ability to mix up baseplate angles, truck types and wheel sizes easily. Designed for 250 lb, (113 kg) during normal use which includes some pumping. Riders 250-300 lb (136 kg) should minimize pumping to avoid stress.
How many mm or inch does the bracket drop, like how many mm or inches it could lower my deck
The zee Bracket would drop your deck 38mm or 1.5", but note that use of the bracket may require you to modify your deck. See the DIY Double-Drop above. Contact us at dontwalk@loadedboards.com if you need assistance for your set-up.