ROCKERSymmetrical rocker throughout the deck cups the outer edges of your feet and creates a subtle locked-in sensation, helping you stay firmly planted in slides and facilitating confident and natural movement up and down the length of the board. Additionally, rocker slightly lowers your center of gravity for enhanced stability.
WHEEL WELL FLARESFlared wheel wells increase wheel clearance and also create surface transitions that provide lateral and longitudinal support for your feet, both inside the trucks and on the kicktail. These flares promote board awareness and keep your feet locked into a compound contoured pocket while sliding, cornering, and tucking.
W CONCAVEThe Tesseract family features an intuitive W concave to enhance rider control in all toeside maneuvers. The central hump is tall yet wide, providing strong lateral support near the transitions without compromising arch comfort. The W concave follows a mellow elliptical shape and fades gradually in amplitude approaching the trucks, disappearing 3/4" behind the innermost mounting holes. This design allows the inside edges of your feet to nestle up against the W (for toeside slides) while also allowing the outside of your foot to rest in a more radial dish just behind the flared wheel wells (for comfort while tucking on long downhill runs). Progressive yet mild rail concave provides optimal edge control without sacrificing comfort.
DIRECTIONAL SHAPEThe Cantellated Tesseract sports a single tail kick to meet your ollie-popping, tick-tacking, and manual-balancing needs. The kick length -- tuned for maximum functionality and pop in the original Tesseract -- remains unchanged. However, the Cantellated Tesseract's tail features a wider and fuller shape than its double-kick cousin. The width of the board stays consistent all the way up to the blunted nose for predictable leverage for slides and tricks anywhere on the board.
VARIABLE WHEELBASE24.5" and 26" wheelbase options allow you to fine tune your setup based on your riding style and specific truck geometry. Move your axles in for quicker pop, increased agility, higher traction, and lower swing weight; move them out for greater stability and more lean.
Two layers of custom fiberglass/epoxy skins sandwich two vertically-laminated bamboo cores to create a stiff yet light and damp structure. Laminated to the bottom of the board is a layer of cork which provides vibration damping and (as we learned to our surprise during testing) a significant level of durability. The granular, non-directional structure of the cork helps prevent abrasive damage from propagating (in contrast to a traditional wood or bamboo veneer with long, oriented fibers).
The tessellated pattern in the cork is generated in 4-dimensional space and can only be fully understood if you lick it.
A generous helping of aggressive, large-grit griptape keeps your feet in place anywhere on the deck. Four long and thin tabs extend from the griptape sheet and wrap over the rails near the wheel well flares to provide additional life-saving friction for your heels and toes in all manner of sticky sliding situations.
The 3.5° wedging angle of the Cantellated Tesseract allows for a wide range of interesting hardware configurations. We find that a truck with a lower kingpin angle (below 45°) works synergistically with the wedging angle to provide a versatile balance of lean and turn with a low ride height. A truck with a higher kingpin angle (above 45°) works best with a soft 3-4° wedged riser to simultaneously preserve the steering geometry and damp vibrations.
The Cantellated Tesseract’s powerful pop and lightweight construction pair best with a light and small wheel for freestyle and technical freeride enthusiasts. We ride Orangatang Fat Frees (65mm) or Keanus (66mm) to keep the ollies high and swing weight low. Scale up to a mid- to high-diameter wheel such as Orangatang Kilmers (69mm), Stimulus (70mm), Morongas (72.5mm), Cages (73mm), or Durians (75mm) for higher roll speed, smoother performance on rough pavement, and increased longevity.
For downhill applications, the Cantellated Tesseract can accommodate up to an 80mm race wheel (such as the Orangatang Kegel). Be sure to fine tune your setup with the appropriate hardware (risers, bushings, washers) to provide the performance you’re after, and always check for wheelbite before you ride.